Tips on how to Install Terracotta Tiles

Are you wondering where to get tips of laying terracotta tile? This is the right place to be.

Prepare and clean the surface

After the right terracotta tiles are chosen and ready for installation on any surface, be it a wall, exterior or house interior, it is prudent that the surface is cleaned to ensure proper bonding. A standard level of cleaning should be achieved through thorough cleaning. For rough surfaces, a stiff brush should be used to scrub all the dirt.
Eventually, the intended surface should be cleaned using a combination of water and another suitable solvent such as trisodium phosphate.

Fill in any existing crack or concrete

After the cleaning, it is recommended that any existing crack or damage on the surface, which is to be tilled should be repaired using a crack filling membrane. Normally, a thin mixed mortar is used to cover the holes and cracks. The mortar is smoothed with a trowel to achieve a uniform gradient on the surfaces.

Dry-lay the tiles

Terracotta tiles need to be soaked in water and allowed to dry before they are set for laying. The main reason for soaking the tiles is to ensure that they are not stiff. Additionally, watering them reduces the chances of breakage.
Once the tiles are dry, they are laid on the floor and cut to acquire the right shape to achieve a given pattern. Afterwards, the tiles should be laid close to the laying surface so that technicians can easily reach them with ease while working.

Commence the laying Procedure

Normally, a thin layer of mortar is mixed as directed on the packet instruction. Using a trowel, the mortar is applied on the terracotta, and the hedges are combed to create a groove that will ensure an adhesion is achieved. After that, the tiles are gently laid into place with a specific measurement spacer for consistent spacing.
Notably, the mortar that accidentally lands on the surface of a terracotta tile should be removed immediately using sponge and water.

Grout Application

Grouting is the last procedure in tile installation. Normally, it is applied when the floor is dry and can be stepped. But before it is applied, spacers should be eliminated from the floor. Since terracotta tiles come in various texture, there are some suitable sealing to befit each of them. For instance.

Homemade terracotta

Since it is highly porous, sealing is done before grouting. Other technicians seal them before they are laid. Its one’s choice to decide when to seal them. Besides, such terracotta tiles demand a thick layer of sealant.

Stoneware terracotta

It has a low water absorption rate, and therefore, pre-sealing is not really important. However, grouting is necessary to reduce water absorption through tile hedges.
To sum it up, these are the standard procedures of laying terracotta tile. However, technicians are advised to read instruction manuals to ensure that they follow the right procedure in details. What are your opinions concerning the above tips?

Why White Subway Tiles Are So Popular

Subway tiles are mostly preferred for family and home use for their simplicity and beauty. There are different shades of the white subway tile, ranging from beveled white subway tile, subway backsplash, to bright white ice subway tiles.

Shades of the White Subway Tile

Before talking about why the white subway tiles are so popular, we need to know the various types of subway shades.

Beveled White Subway Tile

This tile is pure white that is, the shade is very rare to find. The advantage of this tile is that it is hard hence hard to break. Its popularity is boosted by the fact that it is an attractive tile that is easy to add a splash of contemporary styling to a home’s décor.

Subway Backsplash

The tile is also a classic and stylish choice especially for a kitchen, this tile is a great backdrop to shelves or colorful artworks, subway backlash can be installed sideways which turns out to be much more interesting

Bright White Ice Subway Tiles

This tile is strictly a wall tile, they offer a long lasting beauty that is versatile, affordable and easy to maintain. These tiles are simple in design. They are white in color and are well polished.

The Price

Subway tiles are relatively affordable ranging from $3 to $13, they are packed in a box of 12 sq. ft. containing 8 tiles per square foot

The Size

Subway tiles come with a variety of sizes from 3″ by 6″, 2″ by 4″ or 4″ by 8″ giving a variety of useful options, wall tiles are best thin and lighter while heavy and thick tiles suit the floor which is an option available with subway tiles.


Subway tiles would gain popularity for their variety usage as they can be used both in the kitchen and in the bathroom wall and floor, as much as floor tiles would need to be heavier and thicker like the terracotta tiles in order to withstand furniture weight and foot activities, the subway tiles poses a suitability for both the wall and the floor though they are best used as wall tiles for a long lasting and durable solution
Terracotta tiles are also a beautiful mix of earthen and red hues that wash in the swooping clouds of color to create a unique yet subdued images on the surfaces of all fired tiles. This is highly influenced by the iron deposits that are contained in the clay used to manufacture terracotta tiles.
The subway tiles is ceramic, which makes many people prefer it than most tiles which are made from clay. In order to achieve the best outcome and beauty on home walls then white subway tiles are the best choice making it a family’s favorite.

How To Maintain Terracotta Tiles

Terracotta tile is a “cooked earth” used to decorate both indoor and outdoor surfaces. For centuries, it has provided an inviting and warm look in driveways, garden paths and walls. Additionally, it comes in an array of colors, shapes, sizes and textures.

As a natural material, terracotta tiles age with time. Thus, it requires some level of care to keep it appealing. Naturally, this kind of decoration becomes more porous with time, allowing the development of stains and watermarks. If one is not careful, he or she can become a slave to terracotta floor maintenance.
This post highlights a few ways to maintain terracotta tiles to give them a diligent surface and to protect them for the future.

Regular Cleaning

It is a good idea to sweep the terracotta floor every time one cleans the neighbouring environs. Sweeping the tiles clean prevents a buildup of dirt and grime. Additionally, regular sweeping makes the general cleaning much faster and easier.
Notably, dirt accumulation results to surface scratches and also weakening of the tiles.

Use of Mild Detergents/Vinegar

A mixture of warm water and vinegar provide an excellent solution for cleaning terracotta tiles. Ideally, vinegar is a robust stain cleanser and it’s very effective in scrubbing oil, grime and accumulated dirt. Other detergents such as soap can also be used to clean terracotta tiles.
When using detergents to clean the tiles, apply the cleaner and scrub before it sips or dries out. Repeat the procedure until the desired look is achieved. Carefully, clean the edges and avoid scrubbing the grout that is applied between the tiles.
When the cleaning is done, thoroughly wipe the excess moisture, which may result in damage through the way of infiltration.

Ensure Regular Sealing

Whether used indoor or outdoor for decorations, terracotta tiles should often be sealed. Outdoor tiles are at higher risk of deterioration than the interior tiles due to temperature fluctuation as a result of snow or rainfall and intense sunlight.
Sealing should, however, be done regardless of the position of the decoration. Sealing the tiles not only restore the beauty of the tiles but it also prolongs the lifespan of the terracotta floor. Conventionally, water is poured on the terracotta floor and left for some time, if the water is absorbed then the sealant is has torn out and has to the reapplied.
Notably, go through the sealant manual to effectively apply the sealant correctly.

Other maintenance methods

  • Do not step on newly installed terracotta tiles or cured tiles. Give the tiles a grace period of 72 hours
  • Wash tiles on a weekly basis with a damp sponge to acquire a light glow ambience. However, for a deep glow clean the tiles with a warm, mild soapy water.

These tips would positively help individuals maintain terracotta tiles. The cleaning methods are the most common way of maintaining such tiles. Nonetheless, cleaning should be done after choosing the right cleaning method and the right detergents. Name some of the ways one can maintain these tiles.

An In-depth Look at Concrete Cement Tiles

Concrete Cement Tiles

Concrete cement tiles can be a lovely alternative to linoleum, hardwood, or carpet.
This type of floor covering lends itself to a variety of different interior aesthetics,
including Tuscan, Modern, and Traditional. They’re easy to clean and maintain and
have the durability to keep their luster even in high traffic areas such as a kitchen or
entryway. Best of all, concrete cement tiles can fit in any remodeling budget. Here
are some things to understand when you’re putting in your new flooring.

Use an eye-catching pattern to tie your room together

Concrete cement tiles don’t just come in standard neutral shades – in fact, one of the
things that homeowners and decorators like best about this floor covering is the
vast options for patterns, colors, and designs. From simple tumbling blocks or small
repeating floral patterns to vividly colored Moroccan-inspired tile patterns, using
tiles can draw the whole room together or tell a design story.

Tiles aren’t just for the floor

Concrete cement tiles aren’t just a lovely floor covering. Their durability makes them
an ideal wall covering in a bathroom or as a kitchen backsplash. Pairing a busy,
colorful pattern with sleek hardwood floors or muted carpet is a simple way to punch
up the appeal of any interior. Modern advances in mixing and setting have allowed
designers to achieve an almost endless variety of color and texture effects with this
versatile material.

Choose floating shelves in a kitchen or bathroom to store and display items –
the brightly patterned tiles in the background can make a cohesive look. Use
concrete tiles in a large walk-in shower to open up the space and reduce feelings
of claustrophobia – bonus if you incorporate a glassed-in shower enclosure.
This allows your stylish tiles to really pop.

Concrete tiles are very durable

Relax and enjoy your space knowing that your concrete cement tile will last for
decades. With proper sealing and care, your flooring or wall covering can last
longer than wood or carpet, and withstand even the heaviest force. Choose concrete
tiles for a garage to add life to the space. Concrete resists drips form autos, as well
– oil and other fluids that can stain typical coverings are easily cleaned from sealed,
treated tiles. The durability means that the floors are difficult to damage. Shoes
with high heels or cleats, furniture, and the most vigorous play from children
won’t even scratch the tiles. They’re ideal for a basement playroom!

Concrete cement tile is environmentally friendly, durable, and long-lasting.
IT can be easily installed, at a fraction of the cost of marble or hardwood. These tiles
can suit any taste and interior design.

Tips on how to Install a Stock Subway Tile Backsplash

Subway Tiles Backsplash Installation
Your backsplash is the finishing touch of a stunning wall. It needs to be stylish,
yet functional and easy to maintain. By changing or upgrading your backsplash,
you will completely elevate the look and feel of any wall. For a fresh and retro
look try using white ceramic stock subway tiles, they are readily available,
very inexpensive and easy to install. Here are some tips on the whole process
of how to install a stock subway tile backsplash.

First, you need the following materials.

• Notched trowel (to spread adhesive)
• Margin trowel (for mixing material)
• Tile spacers
• Rubber grout float (for applying grout)
• Sponge
• Disposable gloves
• 5-gallon bucket
• Protective eyewear
• Tile nippers or tile wet saw
• Tile
• Thinset
• Grout
• Sanded caulking
• Outlet spacers

Once you have all the supplies the following is the procedure to install subway tiles.

Step 1: Remove the Old Tile

The first step is to remove your old tiles and prep your drywall for fresh tile.
Use a hammer to break the old tiles. Hit the old tiles until they start falling off
the wall.

Step 2: Repair (or Replace) the Drywall

Use a multi-tool to cut all around the damaged drywall and pull it off the wall.
Put up fresh drywall by first measuring your area and cut a piece of drywall, then
screw the piece into the studs. Once your space is filled with drywall, apply drywall
tape on all the joints, and then mud the joints and screw the holes with drywall

Usually, you require to allow the drywall compound to dry for 24 hours before
applying the second coat. Then sand it down with a sanding block for a beautiful
and smooth surface.

Step 3: Apply Thinset

Once your drywall is ready, apply thinset. Choose the area you will start from,
then use a trowel to scoop up the thinset. Apply the thinset directly to the space
with the smooth side of the trowel at a 45-degree angle.

Step 4: Lay Your Tiles in a Subway Pattern

Once the thinset is applied to your space, you can start placing the tiles.
To place your tile in a subway pattern, start with a full piece of tile on your first
row, then cut a piece of tile in half to begin your second row. Continue that pattern,
and you’ll end up with the longed for and classic subway pattern. To keep the tiles
levelled and uniformly spaced use spacers. On the ends use a wet saw to cut your
tiles while making sure when you measure to allow for the grout joint. Continue
doing this until you have completed the stock subway tile installation.

Step 5: Grouting

After tiles sets overnight, use a grout joint cleaning tool to remove any thinset
from the tile joints or surface. Then using a rubber float spread grout. If any
excess grout is applied use a damp sponge to give the stock subway tile
backsplash a clean finish.

Create your website with
Get started